The KUKIRIN G2 Max electric scooter is designed to cater to different riding needs, allowing users to switch between a safety-restricted mode and a full-performance mode. Depending on the model version, the operation methods vary. The newer models feature an intuitive physical button combination for quick control, while the older models require adjustments through a parameter settings menu. This design ensures both riding safety and the ability to fully experience the scooter's performance in suitable environments.

1.New G2 Max Speed Control Method

Performance Benchmark Test

To evaluate the scooter's maximum performance potential, first switch to the third gear. Observe the highest idle speed displayed in this gear, as this value provides a clear indication of the scooter's capabilities without speed restrictions.

Quick Speed Limiter Operation

The newer Kukirin G2 Max uses a straightforward button combination:

• To Limit Speed: Press and hold the brake lever, then quickly press the power button twice. The dashboard will flash, confirming the limiter is ON.

• To Remove the Limiter: Repeat the same action. When the dashboard stops flashing, the Kukirin G2 Max e-scooter is in full-performance mode.

2.Old G2 Max Speed Control Method

Access the Parameter Settings Interface

After powering on the scooter, press the designated button three times in quick succession to enter the parameter settings menu.

Detailed Parameter Adjustment Steps

1. In the settings menu, navigate to the P07 parameter option.

2. Select P07 and press and hold the power button. The parameter value will begin flashing, indicating it is ready for editing.

3. The P07 value represents the speed output percentage:

   • A value of 100 indicates no speed restriction.

   • Adjusting the value changes the degree of speed restriction.

4. After adjusting the value, press and hold the power button to save the settings.

Saving and Confirming Settings

After saving the settings, exit the settings menu (wait for the instrument to automatically return to the main page). The system will automatically save all adjusted parameter settings.

Restoring Unrestricted Mode

To re-enable unrestricted speed mode, repeat the above steps, adjust the P07 value to 100, and save before exiting.

Important Safety Considerations

• Testing After Adjustment

After adjusting the speed mode on your Kukirin G2 Max electric scooter, conduct a test in a safe environment. Different settings directly affect acceleration and top speed.

• Regular Maintenance Checks

Regularly check your Kukirin G2 Max e-scooter's basic condition, including tire pressure and brake responsiveness. Reasonable speed management allows for flexible adjustments.

• Riding Safety Principles